LinkedIn
SK CZ
  1. Homepage
  2. Products
  3. Simulation of solar radiation and weather conditions Atlas MTS
  4. Suntest CPS+

Suntest CPS+

A practical bench-top xenon lamp with useful accessories that allow you to tailor SUNTEST to your needs. It can be equipped with a SunCool cooler (for pharmaceuticals/cosmetics), a SunTray sample exchanger (for in vitro SPF) and a SunFlood immersion unit (for coatings/sealants). The SUNTEST CPS+ is used to test changes in material properties caused by sunlight, temperature and humidity in a short time. Changes in products that occur outdoors or indoors over months or years, such as fading, yellowing or embrittlement, can often be simulated within a few weeks within the SUNTEST system.

Ask the merchant
+420 274 001 391 +421 903 250 173
mail@kaitrade.cz

Basic information

  • Tabletop version 90 x 35 x 35 cm
  • Display area 28 x 20 cm (560 cm2).
  • 1 air-cooled 1500 W xenon lamp
  • Microprocessor control, programming keyboard and black and white display
  • Direct setting and control of irradiance at 300-400 nm or 300-800 nm
  • Direct setting and control of black standard temperature (BST)
  • Display of chamber air temperature (CHT)
  • Display of test values ​​and diagnostic messages
  • Parameter control
  • Two pre-programmed test methods and memory for six user-defined tests
  • Multilingual: German, English, Italian, French, Spanish, Polish, Russian, Chinese
  • Horizontal test area max. 560 cm2 for flat or 3D samples
  • Premium solar radiation simulation according to CIE85 reference sun
  • Irradiance range 30-65 W/m2 (300-400 nm) or 250-765 W/m2 (300-800 nm)
  • Range BST 35-100 °C (without SunCool)
  • Quartz filter system with anti-aging coating and selectively reflecting mirrors
  • Shutdown modes: radiation exposure or test time
  • Data output via serial interface RS232

ikonka Temperature
ikonka Moisture
ikonka Sunlight

Product use

ASTM C1442
Standard Practice for Testing Sealants Using Artificial Weathering Equipment
ASTM C1501
Standard Test Method for Determining Color Fastness of Building Sealants Using Laboratory Accelerated Weathering Procedures
ASTM D3424
Standard Practice for Evaluating Relative Lightfastness and Weatherability of Printed Materials
ASTM D5071
Standard Practice for Exposing Photodegradable Plastics in a Xenon Arc Apparatus
ASTM D6695
Standard Practice for Exposing Paints and Similar Coatings to Xenon Arc Testing
ASTM G151
Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Equipment Using Laboratory Light Sources
ASTM G155
Standard Practice for Operating Xenon Arc Apparatus for Exposing Nonmetallic Materials
COLIPA in-vitro UVA (2011)
Method for Determining UVA Protection in Vitro
EPA/ASTM E896
Standard test method for conducting direct aqueous photolysis tests
GB/T 8427
Textiles - Tests for colour fastness - Colour fastness to artificial light: Xenon arc lamp fading test
GB/T 16422
Plastics - Methods of exposure to laboratory light sources - Part 2: Photostability tests for new drug substances and products
ICH Q1B
Q1B testing of photostability of new drug substances and products
ICH Q5C
Stability tests for biotechnology/biological products
ISO 4049
Dentistry - Polymer-based restorative materials
ISO 7491
Dental materials - Determination of colour fastness
ISO 4892-1
Plastics - Methods of exposure to laboratory light sources - Part 1: General guidelines
ISO 4892-2
Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon arc sources
ISO 10977
Photography -- Processed colour photographic films and paper prints -- Methods for measuring image stability
ISO 11431
Building structures -- Fasteners -- Determination of adhesive/cohesive properties of sealants after exposure to heat, water and artificial light through glass
ISO 11979-5
Ophthalmic implants -- Intraocular lenses -- Part 5: Biocompatibility
ISO 24443
Determination of UVA photoprotection of sunscreens in vitro
L'OREAL QAC-MC-151-O
Accelerated light aging
OECD 495
Photoreactivity test for reactive oxygen species (ROS).
OECD 432
OECD Guidelines for the Testing of Chemicals. In vitro phototoxicity test 3T3 NRU
VICH GL5
Guidelines for stability testing: testing the photostability of new veterinary drug substances and medicinal products.
Standard Practice for Testing Sealants Using Artificial Weathering Equipment
ASTM C1501
Standard Test Method for Determining Color Fastness of Building Sealants Using Laboratory Accelerated Weathering Procedures
ASTM D3424
Standard Practice for Evaluating Relative Lightfastness and Weatherability of Printed Materials
ASTM D5071
Standard Practice for Exposing Photodegradable Plastics in a Xenon Arc Apparatus
ASTM D6695
Standard Practice for Exposing Paints and Similar Coatings to Xenon Arc Testing
ASTM G151
Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Equipment Using Laboratory Light Sources
ASTM G155
Standard Practice for Operating Xenon Arc Apparatus for Exposing Nonmetallic Materials
COLIPA in-vitro UVA (2011)
Method for Determining UVA Protection in Vitro
EPA/ASTM E896
Standard test method for conducting direct aqueous photolysis tests
GB/T 8427
Textiles - Tests for colour fastness - Colour fastness to artificial light: Xenon arc lamp fading test
GB/T 16422
Plastics - Methods of exposure to laboratory light sources - Part 2: Photostability tests for new drug substances and products
ICH Q1B
Q1B testing of photostability of new drug substances and products
ICH Q5C
Stability tests for biotechnology/biological products
ISO 4049
Dentistry - Polymer-based restorative materials
ISO 7491
Dental materials - Determination of colour fastness
ISO 4892-1
Plastics - Methods of exposure to laboratory light sources - Part 1: General guidelines
ISO 4892-2
Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon arc sources
ISO 10977
Photography -- Processed colour photographic films and paper prints -- Methods for measuring image stability
ISO 11431
Building structures -- Fasteners -- Determination of adhesive/cohesive properties of sealants after exposure to heat, water and artificial light through glass
ISO 11979-5
Ophthalmic implants -- Intraocular lenses -- Part 5: Biocompatibility
ISO 24443
Determination of UVA photoprotection of sunscreens in vitro
L'OREAL QAC-MC-151-O
Accelerated light aging
OECD 495
Photoreactivity test for reactive oxygen species (ROS).
OECD 432
OECD Guidelines for the Testing of Chemicals. In vitro phototoxicity test 3T3 NRU
VICH GL5
Guidelines for stability testing: testing the photostability of new veterinary drug substances and medicinal products.

Ask the merchant
Powerful
Accurate
Intuitive
Reliable
Laboratory
Safe

Contact our
experts

avatar

Ondřej

Heřmanský

Sales Manager

Inquiry
form

You might be interested

All studies

Why work with us?

Since 1992, we have been offering laboratory, testing, and industrial equipment for professional use. Equipment for almost all industries. We are specialists in the equipment we supply, both in the Czech Republic and Slovakia.

We draw on many years of experience from installing standard products and designing specialized solutions tailored to customer requirements. These customers come from a wide range of industries, including automotive, electronics, construction, pharmaceuticals, military, and biology.

We help everyone with project preparation, selecting the right solution, and the delivery and installation of equipment. We also provide after-sales service and maintenance for individual devices.

Download material

Before downloading product information, you can leave us your contact. We regularly, 12 times a year, inform about news in the Kaitrade company.

Download PDF file directly